Design and Analysis of SRAM cell using Body Bias Controller for Low Power Applications
CIRCUITS SYSTEMS AND SIGNAL PROCESSING(2020)
Abstract
Low power consumption of electronic devices has become one of the most desirable factors in the present day’s technology. Static random access memory (SRAM) being an integral part of most of the electronic gadget suffers from leakage current which results in static power dissipation and subsequently affects its performance particularly during standby or hold mode. This becomes crucial especially for those systems which are portable and have limited power supply. This work therefore proposes a body bias controller implemented with a 7T SRAM cell at 28 nm CMOS technology node which lowers the static power consumption and increases the hold static noise margin (HSNM) of SRAM during standby mode by changing the threshold voltage. Moreover, it also reduces write delay due to reduction in threshold voltage of proposed design without having a significant effect on write static noise margin and read static noise margin. It has been noticed that there is a reduction of 40%, 28%, 41.9% and 30% in static power dissipation whereas there is an enhancement of 19%, 14.2%, 6.6% and 5.2% in HSNM of the proposed design when compared to 6T SRAM cell, 7T SRAM cell, WRE8T SRAM cell and 9T SRAM cell, respectively. The proposed design can thus be a suitable alternative for low power SRAMs.
MoreTranslated text
Key words
Body bias controller,7T SRAM cell,Static power dissipation,Stability,Delay
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined