Control performance and energy saving of multi-level pressure switching control system based on independent metering control

Aiming at the problem of large energy consumption in hydraulic control system with large load and variable working conditions,based on the multi-level pressure switching control system ( MP-SCS) ,a multi-level pressure switching control system based on independent metering control is pro-posed combined with the independent metering control technology.The configuration principle of the system is given,the mathematical model of this system is established,and the control strategy of the system under 4 different working quadrants is put forward.Finally,the control performance and en-ergy saving characteristics of the system are tested.The test results show that the switching of high and low pressure power supply has a certain effect on the response of step position and ramp position under impedance working condition.The displacement curves show slow climbing or abrupt change of ramp position,and the position accuracy is less than 1 mm.The multi-level pressure switching control system based on independent metering control can recover and store energy under the tran-scendence working conditions.The control accuracy is about 1 mm,and the energy recovery rate is about 70％ ～80％.