Physical and numerical modeling of liquid slag entrainment in mould during slabs casting

The paper presents results of physical and numerical modeling of liquid slag entrainment during continuous casting of steel slabs process. The main aim of this work was to determine the critical casting speed and also to specify, which entrainment mechanism is most responsible for transport of slag droplets into steel volume. Physical modeling was based on water-oil model of mould, made on reduced linear scale of S-l=0.4. In mathematical modeling, Realizable k-epsilon and LES WALE models were used to describe turbulent motion of water and oil, whereas Volume of Fluid model was used to take into account interactions between phases. It was found, that the main cause of slag entrainment is the formation of von Karman vortex in the vicinity of submerged entry nozzle. The results of laboratory experiments and numerical simulations were compared each other. Both method are a useful tools for modeling of slag entrainment. Great agreement was found between laboratory experiments and numerical simulation carried out using LES WALE model, regarding the shape of the oil and oil entrainment as a result of vortex structures formation. However, in the simulation case using Realizable k-epsilon model, the oil entrainment hasn't been modeled for the conditions under consideration.