Multivariate Geostatistical Modeling Of Lower Calorific Value In Multi-Seam Coal Deposits

Featured Application This research is significant for the mining industry since a reduction to estimation uncertainty at no additional drilling cost could lead to critical savings in coal production. The estimation of fuel characteristics and spatial variability in multi-seam coal deposits is of great significance for the optimal mine planning and exploitation, as well as for the optimization of the corresponding power plants operation. It is mainly based on the quality properties of the coal (i.e., Lower Calorific Value (LCV), ash content, CO2, and moisture). Even though critical, these properties are not always measured in practice for all available borehole samples, or, they are generally estimated by using non-parametric statistics. Therefore, spatial modeling of LCV can become problematic due to the limited number of data. Thus, the use of other available correlated attributes might be helpful. In this research, techniques of multivariate geostatistics were used to estimate and evaluate the spatial distribution of quality properties in a multi-seam coal deposit, with special reference to the LCV. More specifically, kriging, cokriging, and Principal Component Analysis (PCA) techniques were tested in a case study as estimators of the LCV, using an extensive set of borehole data from the South Field lignite mine in Ptolemais, Greece. The research outcomes show that the application of kriging with two PCA factors and the use of inverse transform result in the best LCV estimates. Moreover, cokriging with two auxiliary variables gives more accurate values for a LCV estimate, in relation to the kriging technique. The research outcomes could be considered significant for the coal mining industry, since the use of correlated quality attributes for the estimation of LCV may contribute to a reduction of the estimation uncertainty at no additional drilling cost.