Rock physics attribute analysis for hydrocarbon prospectivity in the Eva field onshore Niger Delta Basin

Direct hydrocarbon indicator (DHI) expressions observed on seismic could arise due to various geological conditions. Such expression could lead to misinterpretation as hydrocarbon presence if not properly analyzed. This study employs rock physics attributes analysis to evaluate an identified prospect in the undrilled area of the studied reservoir. Prospect identification was actualized by analyzing structural and amplitude maps of the reservoir, which revealed a possible roll over anticline at both the exploited and prospective zone, with a very good amplitude support that conforms to structure. Well-based cross-plot analysis adopted four cross-plot techniques for feasibility study to test the applicability of rock physics for prospect evaluation in the field; Lambda-Rho versus Lambda-Rho/Mu-Rho ratio; Mu-Rho versus Lambda-Rho; and Poisson Ratio versus P-impedance. The result presented Poisson ratio, Lambda-Rho and Lambda/Mu-Rho ratio as good fluid indicator and Mu-Rho as a viable lithology indicator. As such, they were selected for seismic-based attribute and cross-plot analysis to validate the identified prospect. The results from seismic-based analysis showed consistency in the expression of the analyzed attribute at both the exploited and prospective zone. The seismic-based cross-plot analysis result was similar to the well-based analysis and was able to confirm that the observed amplitude expression in the exploited zone is an indication of hydrocarbon-bearing sand.