A Mechanically Stable and High-Sensitivity Glucose-Sensitive Membrane Based on the Entrapping of Immobilized GODs in PVA+PEG Composite Hydrogels
IEEE Sensors Journal(2021)
Abstract
A mechanically stable and high-sensitivity optical glucose sensitive membrane (OGSM) is prepared by immobilizing glucose oxidases (GODs) onto a mixture of SiO2 mesocellular foams (SiMCFs) and nanoparticles (SiNPs) and embedding ImGODs in the composite gel of polyvinyl alcohol (PVA) and polyethylene glycol (PEG). The OGSM is coated onto a gold-glass sheet to create a surface plasmon resonance (SPR) sensor. For the OGSM consisting of SiMCFs and SiNPs with a mass ratio of 7:3, PVA and PEG with a mass ratio of 4:1, resonance angle of the sensor decreases from about 77.19° to 71.45°, and the average sensitivity is 0.029°/(mg/dL) in a glucose concentration range of 0-200 mg/dL. It was found that the volume fraction of glucose in the OGSM is linear approximately with the concentration of glucose when the concentration of glucose is lower than about 80 mg/dL, as described by the Freundlich isotherm model. The Langmuir isotherm model is suitable for describing the adsorption process of the OGSM for the glucose molecules in a concentration range of 80-200 mg/dL. In addition, Young's modulus of three strips of OGSMs, 0.573 MPa, 0.642 MPa, and 0.649 MPa were obtained, show that the OGSMs have good biomechanical stability.
MoreTranslated text
Key words
Surface plasmon resonance sensors,glucose-sensitive membranes,glucose oxidase,adsorption isotherm
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined