Gold-leaching performance and mechanism of sodium dicyanamide

In this work, sodium dicyanamide (SD) was used as a leaching reagent for gold recovery, and the effects of the SD dosage and solution pH on the gold-leaching performance were investigated. A gold recovery of 34.8% was obtained when SD was used as the sole leaching reagent at a dosage of 15 kg/t. In the presence of a certain amount of potassium ferrocyanide (PF) in the SD solution, the gold recovery was found to increase from 34.8% to 57.08%. Using the quartz crystal microbalance with dissipation (QCM-D) technique, the leaching kinetics of SD with and without PF were studied. The QCM-D results indicate that the gold-leaching rate increased from 4.03 to 39.99 ng·cm −2 ·min −1 when the SD concentration was increased from 0 to 0.17 mol/L, and increased from 39.99 to 272.62 ng·cm −2 ·min −1 when 0.1 mol/L of PF was used in combination with SD. The pregnant solution in the leaching tests was characterized by X-ray photoelectron spectroscopy and electrospray mass spectrometry, which indicated that Au and (N(CN) 2 ) − in the SD solution formed a series of metal complex ions, [AuNa x (N(CN) 2 ) x +2 ] − ( x = 1, 2, 3, or 4).