Effect Of The Soft And Hard Interbedded Layers Of Bedrock On The Mechanical Characteristics Of Stabilizing Piles

In this paper, the mechanical characteristics of stabilizing piles embedded in layered bedrocks are studied both experimentally and numerically. The influence of soft and hard interbedded layers in the structure of the bedrock on the mechanical characteristics of stabilizing piles is particularly investigated. The discrete element method is used to numerically investigate the response of the stabilizing piles embedded in composite and inclined bedrocks. The simulation results and comparison with experimental data are presented to demonstrate the effectiveness and accuracy of the discrete element model. As the dip angle of the soft/hard interbedded bedrock layers increases from 0 degrees to 45 degrees, it is observed that the displacement of the embedded section of the stabilizing pile increases and reaches the maximum displacement at 45 degrees. In the range of 45 degrees to 75 degrees, the influence of the dip angle of the layered bedrock on the displacement of the embedded section of the pile is gradually reduced.