Localization of Groundwater Contaminant Sources Using Artificially Enhanced Catchment

The localization of groundwater contaminant sources is the first and most fundamental step when dealing with site contamination problems. This paper presents a novel approach for groundwater pollution source identification in a site with low-velocity groundwater in which a strategy of an artificially enhanced catchment is adopted. The distance from a pumping well (artificial sink) to the source zone (unknown source) is calculated by integrating the concentration time series and well flow. Then, the orientation of the source well is delineated by applying the method of distance intersection. This method is suitable for an approximately homogeneous aquifer with average hydraulic conductivity ranging from 1 x 10(-6)to 1 x 10(-5)m/s and a contaminant whose transport process can be generalized to convective migration. The developed method was applied to an industrial contaminated site using three pumping wells and two observation wells. The results demonstrated that four potential source positions were identified. Among these, two positions situated near the production workshop were excluded by observation well responses. The remaining two positions located near the drain were identified as preferred treatment sources. Electrical prospecting showed source orientation consistent with the artificially enhanced catchment results. This proved that the method is effective and provides an alternative tool to help solve the problem of source identification in the first stage of remediation in sites with low-velocity groundwater.