Application of fiber laser in time constant measurement of thin wire thermal resistor
Proceedings of SPIE(2016)
Abstract
Measuring principle of time constant for thin wire thermal resistor was put forward. An 1.07 mu m fiber laser was used to output a rectangle laser pulse with edges of several tens microns and width of 100ms, and the thermal resistor under test was shined by the laser. As a result, the temperature of the thermal resistor rose and gradually went up to a fixed level with the irradiation. And then the thermal resistor's temperature dropped and gradually went down to the room temperature with the laser powered off. Time constant of the thermal resistor could be obtained by means of measuring the temperature variation of the thermal resistor due to the laser pulse. A device was designed and experiments were carried out, the time constants of three commonly used thin wire thermal resistors were measured.
MoreTranslated text
Key words
fiber laser,time constant,thermal resistor,atmospheric refractive index structure constant
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined