Fermentation-Pyrolysis Of Fibre Waste From A Paper Recycling Mill For The Production Of Fuel Products

A range of energy fuels (ethanol, char, oil/wax and gas) was produced from fibre waste contaminated with plastic through the application of a fermentation-pyrolysis route. The fibre component was first converted to ethanol by simultaneous saccharification and fermentation (SSF), achieving an ethanol concentration of 39.8 g/L. The residue, enriched in lignin and plastics, was subjected to fast pyrolysis at temperatures between 350 and 550 degrees C. A wax product with a higher heating value (HHV) higher than 28 MJ/kg was obtained for temperatures higher than 450 degrees C, while values lower than 15 MJ/kg were observed for the oils produced from the untreated waste stream. Pyrolysis at 550 degrees C produced a wax with an HHV as high as 32.1 MJ/kg, where 51.8% of the energy content of the fermentation residue was transferred. The attractive energy contents of the pyrolysis products were enabled by oxygen removal from the feedstock during fermentation to ethanol. (C) 2020 Elsevier Ltd. All rights reserved.