The analysis of selected methods of the yielding of a circular arch support made of v profiles

Steel yielding arch support constructed of V profiles is commonly used to protect galleries and, in some cases, to reinforce or secure a shall support. For this purpose, a closed, circular-shaped arch support is used, with arches overlapped by clamps that are typical for this type of construction. The support has high resistance to the impact of even (distributed over the entire surface of the support) load, however, as a result of significant deformation associated with a change in the radius of the curvatures, the support shows limited yielding capacity. This is due to the increase in resistance to slide on the locks, resulting from changes in the geometry of the ring caused by the rock mass. This article presents the results of research and analysis concerning the elements of the arch support with notches in arches. The research team tested the effect of the depth and location of the notches of the section's flanges on the load impacting on the clamp's bolts and the strength of the roof support. Moreover, the tests covered the influence of the number and location of clamps in a frictional joint on the change in the nature of work and yielding capacity. Finally, the research included both strength tests of the support's elements, as well as strength analyses based on the finite element method.