Development of CSP Mold Powder for Casting High-Ti Micro-Alloyed Steel in Lianyuan Steel
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL(2009)
摘要
China have the largest reserves of Ti and the largest production of continuous cast and continuous rolled thin slabs in the world. But, the high-Ti micro-alloying hasn't been applied widely to thin slab production yet. With upgraded control of metallurgical process and consideration of temperature evenness of slabs, many slab producers commence developing high-Ti steel. Tests found, during casting high-Ti steel, inclusions like TiN, TiO(2), Al(2)O(3) in molten steel make properties of the mold powder change a lot. After casting a heat, content of TiO(2) in powder was 1.85%, which increased from 0 at initial stage, the softening temperature of powder was 1018 degrees C, which rised from initial 851 degrees C, and the hemispherical temperature and flow temperature changed less. Use of for-high-Ti-steel mold powder can increase both the heat flux density of copper plate appropriately and the inclusion adhesion.
更多查看译文
关键词
CSP,continuous casting,mold powder,micro-alloyed steel
AI 理解论文
溯源树
样例
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要