Irradiation-modification of starch-containing thermoplastic blends .1. Modification of properties and microstructure

Irradiation-modification of the blends of various starches with a synthetic polymer [poly (ethylene-co-vinyl alcohol)] was carried out using an electron beam. The effect of irradiation on neat starches was studies using gel permeation chromatography. Changes in the thermal and mechanical properties of the blends, as well as in their microstructures, were also evaluated. The data indicate, consistent with other reports in literature, that starch molecules fragment under the effect of ionizing radiation, while the EVOH is relatively unaffected. These substantial (mainly physical) modifications to the starch molecules manifest themselves in changes in the thermal behavior of the blends. Furthermore, the mechanical properties of filaments obtained from molten irradiated pellets were quite different from those of control filaments, at least for some starches. Micrographic examination of some blends indicated a correspondence between a modification in the microstructure of the filaments and a change in their mechanical properties. It seems likely that the enhanced mobility of the fragmented starch molecules in the melt is responsible for these changes in the microstructure and concomitantly, the mechanical properties of the blend. Such an irradiation-based physical modification of starch may be of use in tailoring the properties of commercial blends of starches with synthetic thermoplastics. (C) 1996 John Wiley & Sons, Inc.