Enhancement of the Electrochemical Properties of an Open-Pore Graphite Foam with Electrochemically Reduced Graphene Oxide and Alternating Current Dispersed Platinum Particles

This paper aimed to improve the electrochemical activity of a pitch-derived open-pore graphite foam (GF) by an electrochemical coating of reduced graphene oxide (RGO) and platinum particles without significantly affecting its 3D-structure. RGO was synthesized using cyclic voltammetry (CV) from a 3 g L(-1)GO and 0.1 M LiClO(4)solution. For the electrodeposition of Pt particles, an alternating current method based on electrochemical impedance spectroscopy (EIS) was used. A sinusoidal voltage from a fixed potential Ei was varied following a selected amplitude (Delta E-ac= +/- 0.35 V) in a frequency range of 8 Hz <= f(i)<= 10Hz, wherei= 500. This method proved its efficiency when compared to the traditional CV by obtaining more highly electroactive coatings in less synthesis time. For samples' characterization, physical measures included permeability, pressure drop, and nitrogen adsorption isotherms. The electrochemical characterization was performed by CV. The surface morphology and chemical composition were examined using field emission electron microscopy (FESEM) and energy-dispersive X-ray spectroscopy (EDX), respectively. RGO improved the electron transfer rate constant of GF, and a more homogeneous coating distribution of reduced size Pt particles was obtained.