Dye-sensitized solar cell utilizing TiO 2 –sulphur composite photoanode: influence of sulphur precursor content
SN Applied Sciences(2019)
Abstract
TiO 2 –sulphur composite films have been prepared and employed as photoanode of dye-sensitized solar cell (DSSC). The influence of sulphur precursor content in terms of thiourea concentration on the structural and optical properties of the sample has been investigated. The anatase and sulphur phases exist in the composite. The secondary phases, namely SO 3 and Ti 3 S 4 , also present in the composite. The 0.3 M sample possesses the highest reflection and absorption in visible region. Raman characterization reveals that the peak at 474 cm −1 corresponds to the A 1g symmetric stretching mode of sulphur. The effect of the sulphur precursor concentration on the performance parameters of the device has also been investigated. The DSSC utilizing the sample with 0.3 M thiourea demonstrates the highest power conversion efficiency, η of 1.80% due to the highest dye loading, the lowest bulk and charge transfer resistance and the longest carrier lifetime. Combining TiO 2 with sulphur in composite form was found as an effective way of enhancing the efficiency of the DSSC.
MoreTranslated text
Key words
Dye-sensitized solar cells, Photoanode, TiO2–sulphur composite
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined