Investigation of the mechanical behavior of soft clay under combined shield construction and ocean waves

This study aims to investigate the mechanical behavior of soft clay under both shield construction and long-term dynamic wave loading in the practical construction of breakwaters to protect coastal power plants. Continuous rotation of the principal stress axis due to cyclic wave loading is reproduced by altering the control loads (that is, axial load, torque, inner cell pressure, and outer cell pressure) in a hollow cylindrical shear apparatus (HCA). In the HCA, the confining pressure is progressively reduced to replicate the stress release induced by ground loss during shield construction. The HCA test results show that both long-term wave loading and shield construction significantly affected the dynamic stiffness of soft clay. Under the combined effects of wave loading and shield construction, the post-cyclic shear strength and stiffness of the soft clay are reduced more significantly compared to the isolated effect of wave loading, especially at lower confining pressure. The degradation of the dynamic secant modulus, Ed, and the initial tangential modulus, Ei, is indicated to be synchronous at the end of the cyclic loading test, which implies the unique disturbance of the combined action of shield construction and dynamic wave loading on the microstructure of soft clay considered in this study. Based on the experimental observations, a simple and effective constitutive model is also developed to reproduce the degradation of stiffness and shear strength of soft clay induced by shield construction and dynamic wave loading.