Fabrication And Characterization Of Si-Pin Photodiodes

TURKISH JOURNAL OF PHYSICS(2019)

Cited 4|Views9
No score
Abstract
In this work, characteristics of silicon-based p(+) type, intrinsic (I), n(-) type (Si-PIN) photodiodes with active area of 3.5 x 3.5 mm(2), 5.0 x 5.0 mm(2), or 7.0 x 7.0 mm(2) and their possible usage in optoelectronics were studied. The devices were fabricated in the Radiation Detector Application and Research Center (NURDAM) of Bolu Abant izzet Baysal University, Turkey. To acquire the device specifications, the current-voltage (I-V) and the capacitance-voltage (C-V) measurements were carried out in the photoconductive mode. Quantum efficiency and spectral responsivity measurements were performed in the photovoltaic mode. Both measurements were carried out in a dark environment at room temperature. The measured values of the dark current (I-dc) and the capacitance of photodiodes were -6.97 to -19.10 nA and 23 to 61 pF at -5 V, respectively. The quantum efficiency measurements of the devices increased up to 66%. P responsivity was found to be 0.436 +/- 1 mA/W at 820 nm. The results indicate that the I-dc current and the performance of the devices were improved. Therefore, the devices can be utilized for optoelectronics applications and commercial usage.
More
Translated text
Key words
Si-PIN photodiodes, dark current, spectral responsivity, quantum efficiency
AI Read Science
Must-Reading Tree
Example
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined