Enhanced Charge Transport in Conventional Polymer Solar Cells with a Perovskite-Type LaNiO 3 Layer.
ACS applied materials & interfaces(2020)
摘要
In this study, a novel metal oxide, lanthanum nickelate (LNO) with a perovskite structure, was introduced into a polymer solar cell (PSC) device, replacing the PEDOT:PSS hole transport layer (HTL). The results show that the LNO-based PTB7-Th:PCBM solar cell exhibits a higher circuit current density, power conversion efficiency, and stability compared with a device with PEDOT:PSS HTL. To understand the effect of LNO HTL on the performance of devices, the active layer morphology and charge transport characteristics in PSCs were systematically analyzed. The morphology of active layer was affected by the HTL, which further regulated the generation and transport processes of charge carrier in the PSC device. For the LNO HTL, an appropriate thickness (8 nm) and a small surface roughness ( = 0.7 nm) can coordinate the energy-level structure of device and improve the interface contact between the FTO electrode and PTB7-Th:PCBM active layer, promoting the charge transport performance of device. Therefore, this work provides a new consideration for the preparation of efficient, stable, and low-cost polymer solar cells.
更多查看译文
关键词
charge transport,hole transport layer,lanthanum nickelate,polymer solar cells,power conversion efficiency
AI 理解论文
溯源树
样例
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要