Upgrading the LANSCE accelerator with a SNS RF-driven H^- ion source

The LANSCE accelerator is currently powered by a filament-driven, biased converter-type H- ion source that operates at 10%, the highest plasma duty factor for this type of source, using only similar to 2.2 SCCM of H-2. The ion source needs to be replaced every 4 weeks, which takes up to 4 days. The measured negative beam current of 12-16 mA falls below the desired 24 mA acceptance of the LANCSE accelerator. The SNS (Spallation Neutron Source) RF-driven, H- ion source injects similar to 50 mA of H- beam into the SNS accelerator at 60 Hz with a 6% duty factor and an availability of >99.5% but requires similar to 30 SCCM of H-2. Up to 7 A h of H- have been produced during the 14-weeks-long source service cycles, which is unprecedented for small emittance, high-current, pulsed H- ion sources. The emittance of the SNS source is slightly smaller than the emittance of the LANSCE source. The SNS source also features unrivaled low Cs consumption and can be installed and started up in <12 h. LANSCE and SNS are working toward the use of SNS H- ion sources on the LANSCE accelerator because they could (a) fill the LANSCE accelerator to its capacity, (b) decrease the source replacement time by a factor of up to 7, and (c) increase source lifetime by a factor of about 4. This paper discusses some of the challenges that emerge when trying to match a different H- source into an existing injector with significantly different characteristics and operating regimes.