Effect of ceramic preform freeze-casting temperature and melt infiltration technique on the mechanical properties of a lamellar metal/ceramic composite:

Elastic properties, compressive stress-strain behaviour and progressive damage evolution of poly-domain metal/ceramic composite samples fabricated by infiltration of Al12Si melt in freeze-cast alumina preforms are studied. Two different preform freezing temperatures were employed to vary the lamellae size while infiltration was carried out using two different techniques - squeeze-casting and die-casting. Due to the faster cooling kinetics at the lower freezing temperature, the lamellae size in the composites based on these preforms are finer and this results into higher compressive strength and stiffness of this composite along the freezing direction. Among the two techniques employed for melt infiltration, the very fast rate of pressure application in die-casting distorts the lamellar structure of the ceramic along the freezing direction. As a result, in die-cast composite samples, the strength and stiffness along the freezing direction are reduced significantly in comparison to the samples infiltrated by squeeze-casting. In-situ scanning electron microscopy under external compression was used to study the progressive damage mechanism in one poly-domain composite sample infiltrated by squeeze-casting. Transverse cracking of the high-angle ceramic lamellae is identified as the predominant damage mechanism.