Field scale row unit vibration affecting planting quality

With recent developments allowing increased planter speeds, improving spatial uniformity of crop emergence will continue to be an important focus of research. Vertical vibration during planting usually interferes with the seed metering and delivery process, and thereby affects seeding quality. Two different row crop planters were instrumented with accelerometers to monitor vertical vibration of planter row units in five fields with a total area of 220 ha in both no-till and strip-tilled conditions. The test results showed that the row unit vibration linearly increased with planting speeds. The R 2 of each fitting equation was more than 0.90. The main frequencies of the vibration were concentrated in a low-frequency band of 3 Hz to 10 Hz. These frequencies did not show an increasing trend with the planter speed. However, the amplitude clearly increased when the planter speed increased. For the John Deere MaxEmerge™ 5 planter, the manually measured average plant spacing was close to the target plant spacing with a maximum error of 21 mm, and a max coefficient of variation (CV) of 24.3%; the standard deviation (SD) increased with travel speed and row unit vibration. For the John Deere ExactEmerge™ planter, the plant spacing was closer to the target plant spacing with a maximum error of only 5 mm and a max CV of 14.3%; the SD remained almost constant, at lower values than that of the MaxEmerge™ 5, at different speeds. For both planters, overall, the row unit vibration increased planting spatial variability. The quality of feed index decreased with increased vertical acceleration on the row unit while the miss index increased. However, the multiples index was generally unaffected by row unit vibration.