An Investigation of the End-Notched Flexure and End-Loaded Split Tests Applied to the Mode II Interlaminar Fracture of a SiC/SiC Ceramic Matrix Composite

Delamination is a common failure mode observed in ceramic matrix composites (CMCs) and occurs as a result of applied interlaminar tensile and shear stresses exceeding the interlaminar strength. As CMCs are further implemented into aero engines, the need to understand their interlaminar failure becomes increasingly important. While significant contributions have been made toward understanding the mode I fracture toughness of CMCs, limited work exists on mode II. Several test methods for measuring the mode II fracture toughness have been proposed in the literature, namely, the end-notched flexure (ENF) and the end-loaded split (ELS) tests. This work investigates the mode II fracture toughness of a melt-infiltrated SiC/SiC CMC at ambient temperature using the ENF and ELS test methods. Acoustic emission (AE), direct current potential drop (DCPD), and digital image correlation (DIC) are implemented as health monitoring techniques to monitor crack initiation and propagation. Results show reasonable correlation between the two test methods and that the ELS test method is better suited for characterizing R-curve behavior.