The Effect Of Microwave Heating On The Microstructure And The Mechanical Properties Of Reaction-Bonded Boron Carbide

Reaction-bonded boron carbide composites were fabricated by both microwave (under Ar/10% H-2) and conventional heating (under vacuum or Ar/10% H-2). Silicon carbide (SiC) formation occurred in all cases and was slightly favored in the case of microwave heating under Ar/H-2. The resulting microstructures were influenced by the heating process and atmosphere; the SiC existed in the form of needles with conventional heating under vacuum. SiC small polygonal grains were present after microwave heating under Ar/H-2. Both the atmosphere and the electromagnetic field influence the SiC morphology. Despite this difference, the hardness and toughness of composites obtained by both heating techniques were similar.