Deuterium as a cleaning gas for ITER first mirrors: experimental study on beryllium deposits from laboratory and JET-ILW

Cleaning techniques for metallic first mirrors are needed in more than 20 optical diagnostic systems from ITER to avoid reflectivity losses. Plasma sputtering is considered as one of the most promising techniques to remove deposits coming from the main wall (mainly beryllium and tungsten). Previous plasma cleaning studies were conducted on mirrors contaminated with beryllium and tungsten where argon and/or helium were employed as process gas, demonstrating removal of contamination and recovery of optical properties. Still, both abovementioned process gases have a non-negligible sputtering yield on mirrors. In this work, we explored the possibility to use a sputter gas having a small impact on mirrors while being efficient on Be deposits, e.g. deuterium. Two sputtering regimes were studied, on laboratory deposits as well as on mirrors exposed in .TET-ILW, namely physical sputtering (220eV ion energy) and chemically assisted physical sputtering (60 eV ion energy) using capacitively coupled plasma with radio frequency. The removal of Be and mixed Be/W contaminants, as well as the recovery of reflectivity, was achieved when deuterium was employed at 220eV while cleaning at 60eV was only fully efficient on laboratory beryllium deposits. On mirrors exposed in JET-ILW, the situation is more complex due to the presence of tungsten in the contaminant film, leading to the formation of a tungsten enriched surface that is not easily sputtered, especially at 60eV.