Orientation Effects In Two-Phase Microgap Flow

The high power density of emerging electronic devices is driving the transition from remote cooling, which relies on conduction and spreading, to embedded cooling, which extracts dissipated heat on-site. Two-phase microgap coolers employ the forced flow of dielectric fluids undergoing phase change in a heated channel within or between devices. Such coolers must work reliably in all orientations for a variety of applications (e.g., vehicle-based equipment), as well as in microgravity and high-g for aerospace applications, but the lack of acceptable models and correlations for orientation-and gravity-independent operation has limited their use. Reliable criteria for achieving orientation-and gravity-independent flow boiling would enable emerging systems to exploit this thermal management technique and streamline the technology development process. As a first step toward understanding the effect of gravity in two-phase microgap flow and transport, in the present effort the authors have studied the effect of evaporator orientation, mass flux, and heat flux on flow boiling of HFE7100 in a 1.01 mm tall x 13.0 mm wide x 12.7 mm long microgap channel. Orientation-independence, defined as achieving similar critical heat fluxes (CHFs), heat transfer coefficients (HTCs), and flow regimes across orientations, was achieved for mass fluxes of 400 kg/m(2) s and greater (corresponding to a Froude number of about 0.8). The present results are compared to published criteria for achieving orientation- and gravity-independence.