Preparation of carboxylated graphene oxide for enhanced adsorption of U(VI)
Journal of Solid State Chemistry(2019)
Abstract
In this study, carboxylated graphene oxide (GO-COOH) was prepared via a simple and feasible method to enhance the adsorption of U(VI). GO-COOH were characterized by FT-IR, XRD and XPS technique, and then applied as the adsorbent for U(VI) ions removal from water. The effects of conditions for U(VI) adsorption, including initial pH of aqueous solution, adsorbent dose, contact time, and initial concentration of U(VI) solution were investigated. The result indicated that the maximum adsorption of U(VI) on GO-COOH was 315 mg/g at the optimum adsorption condition (Ca = 0.2 g/L, pH = 6.0, t = 6 h, C0 = 100 mg/L and T = 25 °C), which was significantly higher than that on GO (190 mg/g) in the same condition. Compared to GO, the maximum U(VI) adsorption capacity of GO-COOH increases by 65.8%. The adsorption process was described well with pseudo-second-order kinetics and the Langmuir isotherm model, indicating the chemisorption process and monolayer adsorption process.
MoreTranslated text
Key words
Carboxylated graphene oxide,U(VI) adsorption,Chemisorption process,Monolayer adsorption process
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined