Pre-Coated Fe-Ni Film To Promote Low-Pressure Carburizing Of 14cr14co13mo4 Steel

Case-hardening 14Cr14Co13Mo4 martensitic stainless steel needs to be carburized to improve surface performance. Low-pressure carburization has the benefit of having oxidation-free production and being ecofriendly. However, compared with the low-pressure carburization of the low-alloy steel, low-pressure carburization of the 14Cr14Co13Mo4 steel consumes more time and has a risk of network carbides. In order to promote carbon diffusion and avoid network carbide, Fe-Ni films with various thickness were electrodeposited on the 14Cr14Co13Mo4 steel prior to low-pressure carburization. The experimental results show that, under the same carburizing conditions, the surface carbon content decreases and the carburized layer increases with the increase of Fe-Ni film thickness. After the hardening heat treatment, the effective case depth (ECD) of the sample coated with 6.0 mu m Fe-Ni film was increased by 29% compared to that of the uncoated sample. The morphology of carbides was a strip-shaped, discontinuous network distribution in the uncoated sample, while in the Fe-Ni coated samples, the carbides changed to a globular, uniformly dispersed distribution. The effect of Fe-Ni film on the low-pressure carburizing of steel is explained by the simulation of the carbon diffusion using DICTRA software. The Fe-Ni films reduce the steel surface carbon content in each boost stage of low-pressure carburizing and release carbon atoms in every diffusion stage. Through this adjustment mechanism, the steel surface carbon content can be reduced and carburized layer growth can be promoted.