Damkohler Number Analysis On The Effect Of Ozone On Autoignition And Flame Propagation In Internal Combustion Engines

Ozone-assisted combustion has shown promise in stabilizing combustion and extending operating range of internal combustion engines. However, it has been reported that sensitivity of ozone quantity on combustion varies significantly depending on combustion modes. For example, autoignition-driven combustion in homogeneous charge compression ignition (HCCI) engine was found to be highly sensitive to the ozone concentration, and up to 100 ppm was found to be sufficient to promote combustion. On the other hand, flame propagation in spark-ignition (SI) engine has been reported to be much less sensitive to the ozone amount, requiring ozone concentration about 3000 similar to 6000 ppm to realize any benefit in the flame speed. A better understanding of the ozone sensitivity is required for combustion device design with ozone addition. In this study, a Damkohler number analysis was performed to analyze the vast difference in the ozone sensitivity between autoignition and flame propagation. The analysis showed that, for ozone to be effective in flame propagation, the contribution of ozone on chemistry should be large enough to overcome the diffused radical from the oxidation layer. It is expected that similar analysis will be applicable to any additives to provide an understanding of their effect.