Mechanism Of Pore Formation In Novel Porous Permeable Ceramics Prepared From Steel Slag And Bauxite Tailings

Porous permeable ceramics (PPC) were prepared from composite ceramsites (CC) via a single firing process, CC were granulated with steel slag as a core and bauxite tailings in an outer-layer. XRD, SEM, EDS, mercury porosimetry and metallographic microscopy were used to study its properties and the pore formation mechanism. Results showed that during sintering process, gradual diffusion of cations from slag to tailings layers enhanced bonding among CC with formation of new crystals: anorthite and pyroxene. PPC had a wider distribution of pores from 0-300 mu m sintered at 1 160 degrees C. With an increase in sintering temperature, ceramics were densified with disappearance of the small pores, which had an increasing threshold diameter values from 45 mu m at 1 180 degrees C to 70 pm at 1 190 degrees C. Big pores larger than the threshold values would be remained and enlarged due to shrinkage of CC during the densification process. The decreasing amounts of pores and an increasing pore diameter had contrary effects on its permeable properties. PPC sintered at 1 180 degrees C with porosity of 27.5% and medium pore diameter of 92.7 mu m had the optimum properties with bending strength of 10.92 MPa, water permeability of 0.039 cm/s and qualified leaching properties of harmful elements (Mn, Cr, V and Pb). This study would promote a more feasible and economic method for producing porous permeable ceramics and improving added value of steel slag and tailings.