Analytical modeling of hot behavior of Ti-6Al-4V alloy at large strain
Materials & Design(2019)
Abstract
Hot deformation behavior of the Ti-6Al-4V alloy is studied through hot torsion tests. Cylindrical samples are twisted at different strain rates and temperatures in the β phase domain. The recorded torque vs twisting angle data are converted to strain vs stress data using the appropriate methods. All the flow curves obtained are characteristic of continuous dynamic recrystallization. The flow stresses exhibit rapid growth to reach a single maximum followed by a decrease and a steady-state regime. The influence of strain rate and temperature is taken into account. An analytical model is proposed, which gives accurate flow curves for the Ti-6Al-4V alloy for processing temperatures between 1000 °C and 1100 °C and strain rates between 0.01/s and 1/s. The model is validated by further experimental tests.
MoreTranslated text
Key words
Large strain,Hot behavior,Ti-6Al-4V alloy,Flow stress,Analytical behavior law,Torsion test
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined