On the onset of fracture as a silicon‐based polymer converts into the ceramic phase

Silicon-based polymers evolve into refractory ceramics when heated gradually up to similar to 1000 degrees C. The conversion is accompanied by the loss of gaseous species, and by a two-fold increase in density. The shrinkage can produce microcracks if the heating rate is too high, or if the specimen is too thick. This communication builds on earlier work whereby the measurement of gas evolution, and its relationship with viscous flow, are related to the onset of fracture in disk-shaped green (polymer) samples. The onset is determined as a function of the thickness of the disks, and of the heating rate. The results are presented in the form of a processing map. The overlay with gas evolution, and strain-rate measurements, suggest that fracture initiates with the release of hydrogen and methane, starting at temperatures near 750 degrees C.