Ultra-high sensitive and selective H 2 gas sensor manifested by interface of n–n heterostructure of CeO 2 -SnO 2 nanoparticles
SENSORS AND ACTUATORS B-CHEMICAL(2018)
Abstract
Detection of toxic and explosive gases in a selective manner and with higher sensitivity in industries and homes remains very challenging. Therefore, herein, we report on the ultra-high sensitive and selective hydrogen gas sensing using CeO2-SnO2 mixed oxide heterostructure synthesized by a simple hydrothermal method. The BET, photoluminescence, X-ray photoelectron spectroscopy and electron paramagnetic resonance analyses demonstrated that the CeO2-SnO2 heterostructure comprehends a high surface area and a large number of defects related to oxygen vacancies. The formation of heterojunction in CeO2-SnO2 nanostructures was confirmed by the non-linear behaviour IV curve. The gas-sensing characteristics of the CeO2-SnO2 heterostructure showed shorter response and recovery times of approximately 17 and 24 s, respectively, together with high sensitivity (19.23 ppm(-1)) to 40.00 ppm H-2 gas at 300 degrees C. The improved H-2(C) 2017 Elsevier B.V. All rights reserved. gas sensing response of 1323 at 60 ppm H-2 gas is correlated with the higher surface area, pore diameter, surface defects and CeO2-SnO2 heterojunction emerging at the interfaces between the CeO2 and SnO2 serves as additional reaction sites and as well as exposed facets creating the surface to be extremely reactive for the adsorption of oxygen species. The high H-2 gas selectivity observed for the CeO2-SnO2 makes them possible candidates for monitoring H-2 gas at low concentrations (ppm levels). (C) 2017 Elsevier B.V. All rights reserved.
MoreTranslated text
Key words
CeO2,SnO2,CeO2-SnO2 heterostructure,H-2 gas sensors
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined