Investigation Of Sustainable High-Beta Scenarios In The Jt-60sa C-Wall

One of the main goals of the JT-60SA C-wall is the study of steady-state plasma scenarios characterised by high fractions of bootstrap current, low flux consumption and sustainable divertor heat-loads (advanced scenarios). The feasibility of the above scenarios will depend on the demonstration of simultaneous control of core/SOL/divertor conditions to achieve large core pressure/pressure gradients, and preventing impurity accumulation while ensuring an acceptable power load on the divertor targets. In this paper two scenarios at 2.3 MA, 1.7 T with 30 MW and 17 MW of NBI heating, respectively, and 7 MW of ECRH power were simulated with the integrated suite of core/SOL/divertor codes JINTRAC. Various fuelling rates/locations were investigated and it was found that high values of beta, and acceptable levels of power load on the divertor outer-target, can be achieved without impurity seeding for separatrix densities above 2 x 10(19) m(-3) and in conditions of partial divertor detachment. The 0D plasma parameters of the above reduced-power advanced scenario are discussed along with comparison against the reference values of the highest beta scenario in the JT-60SA research plan.