Composite metal substrate for thin film AlGaInP LED applications.

The fabrication and feasibility assessment of n-side up, thin-epilayer, AlGaInPbased vertical light-emitting-diodes (LEDs; emitting area: 1 mm x 1 mm) with a copperinvar-copper-composite metal (CIC) substrate was obtained by wafer bonding and epilayer transferring technologies. The structure of CIC substrate is a top Cu layer of 20 mu m, a middle Invar layer of 64 mu m, and a bottom Cu layer of 20 mu m. The invar layer consists of Fe and Ni at a ratio of 70% to 30%. The coefficient of thermal expansion for CIC is about 6.1 x 10(-6) /K, which is similar to that of the GaAs substrate (5.7 x 10(-6)/K) and AlGaInP epilayers. Due to the high thermal conductivity (160 W/m-K) of 10(4)-mu m-thick CIC, the high performances of the packaged LEDs are obtained. They present a low red shift phenomenon (from 623 to 642 nm for 100 mA to 1 A) and a high output power 212 mW at 800 mA. The CIC substrate can be extended to fabricate high-efficiency thin film LEDs with conventional vertical electrodes. (c) 2019 Optical Society of America under the terms of the OSA Open Access Publishing Agreement