Treatment of wastewater containing Cu2+ using a novel macromolecular heavy metal chelating flocculant xanthated chitosan
Colloids and Surfaces A: Physicochemical and Engineering Aspects(2018)
Abstract
A novel macromolecular heavy metal chelating flocculant, xanthated chitosan (XCTS), was prepared by reacting chitosan with benzaldehyde, NaOH and CS2. In a series of experiments, the flocculation performance of XCTS was evaluated by testing the removal rate of Cu2+ and/or turbidity. Factors that could affect the process such as pH, initial Cu2+ concentration, co-existing organic complexing agents and turbidity were studied. The results showed that XCTS could remove both Cu2+ and turbidity from wastewater with a removal rate of Cu2+ exceeding 97%. When water samples contained Cu2+ and turbidity-causing substance, the removal rate of Cu2+ and turbidity would be both promoted by a cooperative effect from both materials. At pH 2.0–8.0, the removal rate of Cu2+ increased with the pH. However, the removal rate of Cu2+ reached 92.4% at pH 6.0, indicated that XCTS also had a good effect on copper removal in acidic media. Fourier transform infrared spectroscopy analysis revealed that the dithiocarboxy group on XCTS reacted with Cu2+.
MoreTranslated text
Key words
Macromolecule flocculant,Chitosan,Xanthation,Chelation precipitation,Copper-containing wastewater
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined