Effects of ultrasonic treatment on microstructure and mechanical properties of 6016 aluminium alloy

Ultrasonic treatment was applied during solidification forming of 6016 aluminium alloys. The effects of ultrasonic vibration on the microstructure and mechanical properties of the 6016 aluminium alloy ingot were studied. Compared with conventional casting, the ingot prepared with ultrasound applied to the molten metal had a fully refined microstructure and greater material homogeneity. Ultrasonic treatment reduced the amount of porosity developed by embedded gas and also resulted in an obvious decrease in solidification defects, like shrinkage. In addition, component segregation was minimised and the mechanical properties were enhanced.