Effect Of Slurry Concentration On Erosion Wear Behavior Of Aisi 5117 Steel And High-Chromium White Cast Iron
INDUSTRIAL LUBRICATION AND TRIBOLOGY(2018)
摘要
Purpose This paper aims to investigate the influence of slurry concentration on the erosion behavior of AISI 5117 steel and high-chromium white cast iron by using a whirling-arm rig. In this study, the slurry erosion mechanism with particle concentration has been studied.Design/methodology/approach The tests were carried out with particle concentrations in the range of 1-7 Wt.%, and the impact velocity of slurry stream was 15 m/s. Silica sand with a nominal size range of 500-710 mu m was used as an erodent. The study revealed that the failure mode was independent of concentration.Findings The results showed that the erosion rate decreases with the increase in particle concentration and the variation in the reduction depends on the material. It was found that the variation of fractal dimension calculated from slope of linearized power spectral density of eroded surface image for different concentrations can be used to characterize the slurry erosion intensity in a similar manner to the erosion rate. It was also found that the variation of fractal dimension versus concentration of sand has a general trend that does not depend on magnification factor.Originality/value Using the gravitational measurement and image analysis, the variation of the wear with slurry concentration has been analyzed to investigate the implicated mechanisms of erosion during the process.
更多查看译文
关键词
AISI 5117 steel, Slurry erosion, Erosion mechanism, Fractal dimension, High-chromium white cast iron, Particle concentration
AI 理解论文
溯源树
样例
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要