Electrical Conductivity of Film Composites Based on Polyvinyledene Fluoride with Carbon Nanotubes

A. V. Solnyshkin,I. L. Kislova,A. N. Belov,A. V. Sysa, A. A. Stroganov, V. I. Shevjakov,M. V. Silibin, A. A. Mihalchan, A. A. Lysenko

Semiconductors(2018)

Cited 3|Views3
No score
Abstract
The results of a study of film composites based on polyvinylidene fluoride with carbon nanotubes (CNTs) by dielectric relaxation spectroscopy are presented. For composite samples containing more than 0.5 wt % of nanotubes, nonlinear current–voltage characteristics are obtained. The concentration dependences of the electrical conductivity of the composites are examined and the percolation threshold for the samples under study is determined. It is shown that an insignificant increase in the electrical conductivity of the composites is observed even upon filling with 0.2 wt % of CNTs, whereas the electrical conductivity becomes three orders of magnitude higher upon the introduction of 1 wt% of CNTs and is seven orders of magnitude higher at more than 3 wt %, compared with the unfilled polymer. This confirms that CNTs are promising for the development of electrically conducting composites and film materials on the basis of polyvinylidene fluoride.
More
Translated text
Key words
ferroelectric polymer, composite materials, carbon nanotubes, piezoelectric effect, electrically active polymer
AI Read Science
Must-Reading Tree
Example
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined