Biotreatment Of Formaldehyde-Contaminated Air In A Trickle Bed Bioreactor

A biofilm developed on polyurethane packing in a trickle bed bioreactor was used to effectively remove formaldehyde from contaminated air. Formaldehyde removal depended on the retention time of the gas in the bed as well as on the gas-liquid mass transfer coefficient. Both retention time and the mass transfer coefficient depended on the gas flow rate. At 25 +/- 1 degrees C and pH 7, a 99% removal of formaldehyde from air with an initial contamination level of 450 mg L-1 was achieved at a hydraulic retention time of 132 s. The degradation rate was likely limited by oxygen mass transfer. The bioreactor could be operated stably over the pH range of 5 to 7 at 25 +/- 1 degrees C. Formaldehyde removal in the bioreactor was mathematically modeled to facilitate design and scale up. The model was shown to agree well with the experimental data. Trickle bed bioreactors offer a potentially viable option for cleaning air streams contaminated with formaldehyde.