Quantitative Analysis Of Wear Particles Generated By Cavitation Erosion In Glycerol-Water Mixtures

Purpose - This paper aimed to analyze removed particles from stationary specimen-aluminum (Al-99.92) produced by vibratory cavitation erosion tests in distilled water and glycerol-water mixtures.Design/methodology/approach - The particle morphology which include particle surface topography, size distribution, particle size parameters and particle shape parameters were examined for distilled water and glycerol-water mixtures having different viscosities.Findings - The results showed that the variation of size parameters with viscosity was very similar to the variation of weight loss with viscosity. Both the size parameters and weight losses show a monotonic decrease in going from distilled water to glycerol-water mixtures having viscosity about 10.1 cSt, beyond which the change is very small. On the other hand, the shape parameters were much less sensitive to distinguish between the particles produced in water and glycerol-water mixtures. The mechanism of cavitation erosion is investigated in detail through observations of the removed particles. The particle surfaces topography demonstrated that the mechanism in water and glycerol-water mixtures was fatigue failure.Originality/value - Cavitation often occurs in almost all machines that handle liquids, especially at high speeds, leading to irreparable damage of the components of these machines. Elucidation of such complex phenomenon demands full characterization of the erosion mechanism and controlling parameters inherent to it, so that cavitation erosion can be prevented or at least be reduced through adequate information and collection of relevant data under different operating conditions. Very few studies have been made to approach the viscosity effect upon cavitation erosion from the particle analysis standpoint. The aim of the present work is to identify the effect of liquid viscosity on the size, shape characteristics of the erosion particles and their morphological features. The prevailed mechanisms of wear and particle generation have been proposed based on the acquired information from particle analysis.