Dynamic Dispersive Spectrometer Using A Fiber Bragg Grating For High Pressure Measurements
2016 IEEE SENSORS(2016)
Abstract
A new high resolution dispersive spectrometer has been developed to measure high pressure shock profiles every 10 ns using long Fiber Bragg Gratings. The performances are compared with a dynamic AWG-based spectrometer. Two small diameter fibers allow inserting in parallel two 50-mm long gratings into the target. The use of slightly chirped gratings provides the localization of the shock-wave along them. Placed along the target axis, a gratings reflected spectrum is "blue shifted". The FBG's central wavelength are 1605 nm to cover a pressure range of 0 - 8 GPa. The new spectrometer is based on a femtosecond laser source, a long dispersive fiber and a fast acquisition system with an electrical bandwidth above 30 GHz. The experimental setup was a symmetric impact with 6061T6 aluminum, performed with a 110-mm in diameter single-stage gas gun. An impact velocity of 314 m/s is obtained and generated a sustained level of 2.1 GPa during few microseconds. A resulted Bragg shift of (16 +/- 1) nm is measured. The dispersive spectrometer offers much greater resolution than the AWG one which is favorable to retrieve more easily a pressure profile.
MoreTranslated text
Key words
Fiber Bragg Grating,Shock,Spectrometer,High Energy Material,Femtosecond Laser
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined