Numerical Simulation on Thermal-Electrical Characteristics and Electrode Patterns of GaN LEDs with Graphene/NiOx Hybrid Electrode*

The thermal-electrical characteristic of a GaN light-emitting diode (LED) with the hybrid transparent conductive layers (TCLs) of graphene (Gr) and NiOx is investigated by a finite element method. It is indicated that the LED with the compound TCL of 3-layer Gr and 1 nm NiOx has the best thermal-electrical performance from the view point of the maximum temperature and the current density deviation of multiple quantum wells, and the maximum temperature occurs near the n-electrode rather than p-electrode. Furthermore, to depress the current crowding on the LED, the electrode pattern parameters including p-and n-electrode length, p-electrode buried depth and the distance of n-electrode to active area are optimized. It is found that either increasing p-or n-electrode length and buried depth or decreasing the distance of n-electrode from the active area will decrease the temperature of the LED, while the increase of the n-electrode length has more prominent effect. Typically, when the n-electrode length increases to 0.8 times of the chip size, the temperature of the GaN LED with the 1 nm NiOx/3-layer-Gr hybrid TCLs could drop about 7K and the current density uniformity could increase by 23.8%, compared to 0.4 times of the chip size. This new finding will be beneficial for improvement of the thermal-electrical performance of LEDs with various conductive TCLs such as NiOx/Gr or ITO/Gr as current spreading layers.