Effects of Pre-Stretching on Creep Behavior, Mechanical Property and Microstructure in Creep Aging of Al-Cu-Li Alloy.

The effects of pre-stretching on creep behavior, mechanical properties and microstructure during the creep aging process of Al-Cu-Li alloy were investigated. AA2195 was taken as the representative of Al-Cu-Li alloys. It is found that the total creep strain and strength property of creep aged AA2195 specimens can be improved through effective pre-stretching. Unlike with artificial aging, yield strength increased increasing by 47%. The TEM images show that the constitution of aging precipitates in the creep-aged specimens are obviously changed by pre-stretching. Precipitates in the 2% pre-stretched specimen are mainly composed of T-1 phase, while a great amount of ' phase accompanied with a few T-1 phase were found in the non-pre-stretched specimen. Moreover, pre-stretching introduces many dislocations which benefit the creep deformation, but the increasing dislocation density also accelerates the nucleation and growth of the precipitates as well. The premature T-1 phase has a great blocking effect to the dislocation motion, creating a lower decrease rate but a longer duration in the early creep stage. Except for the initial dislocations, the dislocation motion in the creep aging process is also a favorable factor to precipitate the T-1 phase.