Demonstration Of A 120 Degrees Hybrid Based Simplified Coherent Receiver On Soi For High Speed Pon Applications

We demonstrate the first simplified coherent receiver using a 120 degrees hybrid on siliconon-insulator (SOI) for high speed PON applications. This coherent receiver integrates an inverse taper edge coupler for the received signal, a vertical grating coupler for the local oscillator input, a polarization splitter and rotator (PSR), a 120 degrees hybrid based on a 3x3 multimode interference (MMI) coupler, and three germanium photodetectors. We achieved 25 Gbit/s two-level pulse amplitude modulation (PAM-2) transmission over 30 km standard single mode fiber (SMF) in the C-band without any digital signal processing (DSP) (e.g., pre-emphasis, pulse shaping, equalization, nonlinearity compensation) and dispersion compensation (e.g., optical or digital) either at the transmitter or at the receiver. The requirements for frequency and phase locking of the local oscillator (LO) were avoided due to the use of intensity modulated signals. Receiver sensitivities of -23.70 dBm, -20.30 dBm, and -15.10 dBm are achieved at a bit error rate (BER) below the hard-decision forward error correction (HD-FEC) threshold (i.e., 3.8 x 10(-3)) in back-to-back (B2B), after 21 km and 30 km, respectively. We also demonstrate 25 Gbit/s PAM-4 transmission achieving receiver sensitivities of -15.30 dBm, -13.90 dBm, and -9.50 dBm below the HD-FEC threshold in B2B, after 10.5 km and 21 km, respectively. (C) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement