Long term ageing of polyamide 6 and polyamide 6 reinforced with 30% of glass fibers: physicochemical, mechanical and morphological characterization
Journal of Polymer Research(2017)
Abstract
Hygrothermal ageing of polyamide 6 (PA6) and polyamide 6 reinforced with 30 wt% of glass fibers (PA6GF30) was undertaken. Immersion was conducted in distilled water at 90 °C and 100% relative humidity (RH) for up to 80 days (1920 h). Results revealed a noteworthy decrease either in glass transition temperature T g or in tensile properties, at early stage of ageing, for both studied materials. This decline was mainly caused by the plasticization effect of water and the weakness of the interfacial interactions leading as a consequence to a loss of adhesion between fiber and matrix. Afterwards, physical and mechanical properties decrease monotonically testifying the occurrence of exhaustive damages and chemical reaction phenomena. Such phenomena were yellowing and crazing formation which were observed for both materials after 1920 h of conditioning. The former is caused by the thermo- oxidation whereas the latter results from the release of internal stresses induced by water sorption. These chemical reactions were monitored by infrared spectroscopy. Thus, an increase of the free N-H stretch and the carbonyl groups (imides) was noted. Accordingly, it seems that long term immersion in distilled water at high temperature induces chemical reactions which indicate the severity of the damage.
MoreTranslated text
Key words
PA6,PA6GF30,Ageing,Adhesion
AI Read Science
Must-Reading Tree
Example
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined