Investigation On Shielding Failure Of A Novel 400-Kv Double-Circuit Composite Tower

In this paper, the lightning shielding performance of a newly designed 400-kV double-circuit composite tower is investigated. Based on a revised electrogeometric model (EGM) method, traditional shielding failure regions located at both sides of a traditional tower are no longer a big issue for the fully composite tower, due to its unusual 'Y' configuration. Instead, a new unprotected region exists in the tower center. The maximum lightning current that can lead to shielding failure and the shielding failure rate of the new tower are calculated. To verify results from the revised EGM method, a scale model test is conducted. Spatial shielding failure probability around the tower is calculated based on the ratio of discharge paths recorded in the test. Moreover, based on test results, the maximum shielding failure lightning currents are obtained. Analysis and results derived from the revised EGM method and scale model test have a small deviation, verifying the feasibility of these two methods in the lightning performance evaluation of the fully composite tower. Both methods confirm that the unusual negative shielding angle of 60 in the newly composite tower provides good lightning shielding performance. The feasibility of the novel composite tower is verified from the lightning protection point of view.