Effects Of Aln Coating Layer On High Temperature Characteristics Of Langasite Saw Sensors

High temperature characteristics of langasite surface acoustic wave (SAW) devices coated with an AlN thin film have been investigated in this work. The AlN films were deposited on the prepared SAW devices by mid-frequency magnetron sputtering. The SAW devices coated with AlN films were measured from room temperature to 600 degrees C. The results show that the SAW devices can work up to 600 degrees C. The AlN coating layer can protect and improve the performance of the SAW devices at high temperature. The SAW velocity increases with increasing AlN coating layer thickness. The temperature coefficients of frequency (TCF) of the prepared SAW devices decrease with increasing thickness of AlN coating layers, while the electromechanical coupling coefficient (K-2) of the SAW devices increases with increasing AlN film thickness. The K-2 of the SAW devices increases by about 20% from room temperature to 600 degrees C. The results suggest that AlN coating layer can not only protect the SAW devices from environmental contamination, but also improve the K-2 of the SAW devices.