An innovative collagen-based cell-printing method for obtaining human adipose stem cell-laden structures consisting of core-sheath structures for tissue engineering.
BIOMACROMOLECULES(2016)
摘要
Three-dimensional (3D) cell printing processes have been used widely in various tissue engineering applications due to the efficient embedding of living cells in appropriately designed micro- or macro-structures. However, there are several issues to overcome, such as the limited choice of bioinks and tailor-made fabricating strategies. Here, we suggest a new, innovative cell-printing process, supplemented with a core-sheath nozzle and an aerosol cross-linking method, to obtain multilayered cell-laden mesh structure and a newly considered collagen-based cell-laden bioink. To obtain a mechanically and biologically enhanced cell-laden structure, we used collagen-bioink in the core region, and also used pure alginate in the sheath region to protect the cells in the collagen during the printing and cross-linking process and support the 3D cell-laden mesh structure. To achieve the most appropriate conditions for fabricating cell-embedded cylindrical core sheath struts, various processing conditions, including weight fractions of the cross-linking agent and pneumatic pressure in the core region, were tested. The fabricated 3D MG63-laden mesh structure showed significantly higher cell viability (92 +/- 3%) compared with that (83 +/- 4%) of the control, obtained using a general alginate-based cell-printing process. To expand the feasibility to stem cell-embedded structures, we fabricated a cell-laden mesh structure consisting of core (cell-laden collagen)/sheath (pure alginate) using human adipose stem cells (hASCs). Using the selected processing conditions, we could achieve a stable 3D hASC-laden mesh structure. The fabricated cell-laden 3D core sheath structure exhibited outstanding cell viability (91%) compared to that (83%) of an alginate-based hASC-laden mesh structure (control), and more efficient hepatogenic differentiations (albumin: similar to 1.7-fold, TDO-2: similar to 7.6-fold) were observed versus the control. The selection of collagen-bioink and the new printing strategy could lead to an efficient way to achieve 3D cell-laden mesh structures that mimic the anatomical architecture of a patient's defective region.
更多查看译文
关键词
adipose,collagen-based,cell-printing,cell-laden
AI 理解论文
溯源树
样例
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要