Predicting Soluble Nickel In Soils Using Soil Properties And Total Nickel

Soil soluble nickel (Ni) concentration is very important for determining soil Ni toxicity. In the present study, the relationships between soil properties, total and soluble Ni concentrations in soils were developed in a wide range of soils with different properties and climate characteristics. The multiple regressions showed that soil pH and total soil Ni concentrations were the most significant parameters in predicting soluble Ni concentrations with the adjusted determination coefficients (R-adj(2)) values of 0.75 and 0.68 for soils spiked with soluble Ni salt and the spiked soils leached with artificial rainwater to mimic field conditions, respectively. However, when the soils were divided into three categories (pH < 7, 7-8 and > 8), they obtained better predictions with R-adj(2) values of 0.78-0.90 and 0.79-0.94 for leached and unleached soils, respectively. Meanwhile, the other soil properties, such as amorphous Fe and Al oxides and clay, were also found to be important for determining soluble Ni concentrations, indicating that they were also presented as active adsorbent surfaces. Additionally, the whole soil speciation including bulk soil properties and total soils Ni concentrations were analyzed by mechanistic speciation models WHAM VI and Visual MINTEQ3.0. It was found that WHAM VI provided the best predictions for the soils with pH < 7, was relatively reasonable for pH 7 to 8, and gave an overestimation for pH > 8. The Visual MINTEQ3.0 could provide better estimation for pH < 8 and meanwhile quite reasonable results for pH > 8. These results indicated the possibility and applicability of these models to predict soil soluble Ni concentration by soil properties.